Gas Bottle Storage Cage: Why Ventilation Matters

A gas cylinder is a must in many industries. But as much as how important it is, it should be treated with the kind of respect it deserves, thus putting it in a cage is very important.

Anytime, gas could rupture and cause a massive explosion which can kill people and cause damage to the facility and trucks, cars, products, and buildings nearby. This makes it very critical to have a gas bottle storage cage in the facility for security.

 

The Importance of having One

As soon as gases from the storage cylinders leak into the environment, this could present very serious health hazards and pose a threat to the safety of the workers and the community as a whole. Thus, you should be certain that your gas cylinder unit is carefully designed to avert the buildup of leaked gases.

 

Factors to Consider

When you plan to purchase a gas bottle storage cage, one very important factor you have to consider is ventilation. Proper ventilation is very important to make sure that gases are dispersed safely, as well as fumes, vapors, and mists.

To make sure the proper storage of your gas bottles or cylinders, here are a few recommended ventilation guidelines that you may follow.

  • The ideal structure for a gas cylinder storage should be properly ventilated. There should be no roof and a minimum of two solid walls. Where possible, the walls and doors need to be made from steel wire mesh to enable maximum ventilation.
  • Weather protection is very important for external gas cylinder cages. Therefore, the roof needs to be made in a way that it would not only be protected from elements but in order to ensure sufficient ventilation. Also, the storage unit needs to have gaps between the sloping roof and wall or there should be ventilation passages in the roof apex. Such will help stop the buildup of gas pockets.
  • For internal gas cylinder storage, be sure that your cabinet has ventilation ports so enough dispersal of vapors and gases will be ensured.
  • An ideal gas cylinder storage construction for a non-flammable cylinder or for small quantities of cylinders have three end-to-end walls. At least 25% of the border should be constructed to deliver proper ventilation, especially with meshed fencing.
  • High walls or thin corridors are not capable of facilitating enough ventilation. The rule should be followed- not over 50% of the edge wall should be blocked.
  • Some types of gases are denser than air. Thus, ventilation panels should be placed at both low and high levels in order to prevent the accumulation of gas at floor levels. Your storage solution should not be situated near the culverts or drain as any released chemical gas that is heavier than air could accumulate in the drain.

Proper care and maintenance are very important when handling chemicals gases. But as ventilation is equally important, you need to make certain that there is enough of it to ensure maximum safety.